Vehicle Info
Modifications
Car Audio & Video
'After' pictures I never took before I took the head liner off of everything after sludge
Adding some stiffness to the roof...hopefully no flexing even with 4kw
This is what I'm using for my fans. The voltage on this is selectable, I will be running them at 5V most of the time. I will tie on to the fan wires on the amp as well so when they turn on full blast, my aftermarket ones will as well (the fans on the amp have an off, 5V, and 12V settings, depending on the temperature of the amp)
Foam in the crossmembers!
Deadening of the doors commence!
Cut out for the access hole
Almost done! Waiting on the firewall to be put on.
Getting the baffle ready. At this point, its had 3 coats of wood sealer and a thick coat of resin
Close up of the t-nuts where the speaker will be bolted in
Before baffle
After baffle
Firewall and I'm done!
Bookmark this Ride